Dressing and Adhesive

Industrial Adhesive, Sealing & Maintenance Products for MRO, Assembly and Wholesale

Liangxin manufactures and supplies targeted chemical and mechanical solutions for surface preparation, adhesive removal, thread locking, and industrial joint sealing. Instead of generic all-in-one glues, we provide application-specific formulations tailored to distinct stages of assembly, plant maintenance, and equipment repair.

Compliance & Safety

Complete GHS-compliant SDS / MSDS available for all chemical formulations.

OEM & Private Labeling

Custom fill volumes, aerosol/liquid packaging, and custom brand labeling available.

Quality Assurance

Batch traceability and lab substrate compatibility testing prior to volume shipping.

Product Range

Adhesive Removers & Industrial Solvents
Formulated to break down, dissolve, or soften cured adhesives and sealants without damaging sensitive equipment surfaces.

Rapid Remover Adhesive Remover: Fast-acting chemical remover for tape residues, labels, and uncured sealants.

Heavy-Duty Glue Solvent: High-solvency liquid engineered for stubborn cyanoacrylate (super glue), polyurethane, and anaerobic residues.

Acetone Super Glue Remover: High-purity solvent tailored for rapid breakdown of bonded acrylics and cyanoacrylates on solvent-resistant substrates.

Mechanical Removal Tools
Industrial Glue Scrapers: Ergonomic manual scrapers for physical residue removal on flat, metallic, or glass surfaces where chemical solvents are restricted or require mechanical assistance.

Thread Lockers & Fastener Retention
Thread Locker 271 (High Strength / Red): Anaerobic threadlocking compound designed for heavy-duty threaded fasteners (up to M36). Prevents loosening from continuous vibration, thermal expansion, and shock loads while sealing threads against corrosion.

Industrial Sealants & Gasketing Compounds
588 RTV Flange Sealant: High-performance flexible sealant designed for engine flanges, gearboxes, and flat joint interfaces exposed to oil and temperature fluctuations

Vent & Duct Sealant: Formulated for HVAC ductwork, ventilation flanges, and sheet metal joint sealing where long-term gap filling and moisture resistance are required.

Product Matching by Application

Application / Task	Target Residue or Fastener	Recommended Category	Key Selection Factors	Compatible Substrates
Removing tape & label residue	Pressure-sensitive adhesives	Rapid Adhesive Remover	Evaporation rate, surface sensitivity	Metals, Glass, Painted surfaces
Dissolving cured super glue	Cyanoacrylate, Anaerobics	Heavy-Duty Glue Solvent	Solvency power, exposure time	Steel, Aluminum, Glass, Ceramics
Removing heavy silicone / gasket	Cured silicone, PU sealant	Glue Scraper + Solvent	Mechanical force, chemical softening	Machined metal flanges, Cast iron
Locking vibration-prone bolts	Threaded fasteners (up to M36)	Thread Locker 271	Breakaway torque, temperature range	Steel, Stainless steel, Brass
Sealing duct joints & air vents	Sheet metal gaps, HVAC joints	Vent & Duct Sealant	Gap-filling capacity, flexibility	Galvanized steel, Aluminum

Technical Selection Considerations

Substrate Compatibility

Solvent formulations interact differently across substrate types. Always verify chemical compatibility before applying solvents to ABS, polycarbonate, painted metal, or coated materials. Free lab testing is available for custom substrates.

Chemical Chemistry of Residue

Cyanoacrylates, anaerobics, silicones, and polyurethanes require distinct solvency mechanisms. Matching the remover chemistry to the specific adhesive polymer prevents surface etching and reduces cleanup cycles.

Working Environment & Exposure

For thread lockers and sealants, evaluate continuous operating temperature (-50 C to +150 C), exposure to industrial oils, moisture, and mechanical vibration during the quote stage.

Compliance & Workplace Safety

For MRO facilities and international distributors, chemical products must comply with local import standards and workplace hazard guidelines. Full GHS SDS documents, VOC profiles, and technical data sheets (TDS) are supplied with all sample shipments.

OEM, Private Label & Bulk Supply Options

Product & Specification Options
Custom viscosity and solid content adjustments for volume orders.
Variable container sizing: Small squeeze bottles, aerosol cans, squeeze tubes, or bulk drums.
Full private label service including artwork layout, carton marking, and barcode integration.

Quality Control & Verification
Raw Material Verification: Purity testing for active chemical solvents and anaerobic resins.
Quality Audits: Visual inspection, seal integrity testing, and fill-weight verification for every production run.
Batch Traceability: Lot numbers printed on all primary containers and outer export master cartons for easy tracking.

Ordering Process

Step 1 -> Application & Requirement Submission

Send your technical requirements, target substrate, required package size, and estimated order quantity.

Step 2 -> Technical & Chemical Evaluation

Our engineering team reviews chemical compatibility and suggests the appropriate product series or custom formulation.

Step 3 -> Sample Testing & SDS Provision

Samples are dispatched alongside Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for local evaluation and laboratory approval.

Step 4 -> Commercial Agreement & Order Confirmation

Finalize pricing, packaging artwork, lead times, payment terms, and delivery schedules.

Step 5 -> Batch Production & In-House Inspection

Orders are manufactured under batch-controlled conditions with full quality check protocols applied.

Step 6 -> Export Packing & Shipping

Cargo is packed in compliance with hazardous chemical transit regulations (where applicable) and prepared for global shipping.

FAQ

Q: Do you supply GHS-compliant Safety Data Sheets (SDS / MSDS) for your chemical products?

A: Yes. Fully compliant Safety Data Sheets (SDS) in accordance with global hazard communication standards are provided for all adhesive removers, solvents, thread lockers, and sealants.

Q: Can your adhesive removers be safely used on plastic substrates?

A: Compatibility depends on the specific plastic type. While our removers work safely on metals, glass, and solvent-resistant polymers, sensitive plastics like ABS or polycarbonate require low-solvency formulations. We recommend requesting sample units for test application prior to bulk deployment.

Q: What are the key technical characteristics of Thread Locker 271?

A: Thread Locker 271 is a high-strength, low-viscosity anaerobic threadlocker engineered for permanent locking and sealing of threaded fasteners up to M36. It offers high breakaway torque and strong resistance to industrial fluids and vibration.

Q: What MOQ and packaging options apply to OEM or private-label orders?

A: Private label MOQ depends on the selected container format (aerosol cans, tubes, or squeeze bottles). Custom packaging layout, private branding, and master carton shipping marks are fully supported for OEM clients.

Q: How can we request samples for lab testing?

A: Contact our sales engineering team with your substrate details, adhesive type, and shipping address. Sample batches along with TDS/SDS documentation will be arranged for evaluation.

Request Technical Support or a B2B Quote

Contact our technical sales team today to discuss your maintenance, repair, or OEM assembly requirements.
Please include:

Target application or problem description

Substrate material & adhesive/fastener specification

Package sizing & estimated quantity

Private label or OEM requirements (if applicable)

[ Request a Quote Within 12 Hours ] | [ Request Sample & SDS Package ]

We are one of the most professional dressing and adhesive manufacturers in China, featured by quality products and good service. Please rest assured to wholesale high-grade dressing and adhesive in stock here and get pricelist from our factory. We also accept customized orders.

Rapid Remover Adhesive Remover, Thread Locker 271, Vent Sealant